Skip to content
Pickoryx

Anker A2697 140W 4-Port vs A2687 Prime 160W: Which Device Mix Fits?

A2697 suits a mixed cable drawer because it lists three USB-C ports plus USB-A and shows a four-port output map. A2687 suits a USB-C-only load when up to 160W shared across two or three ports matters. Match the published port allocation to your devices and cables; the ratings do not establish which charger will charge a particular device faster.

Published by Pickoryx · Published 2026-10-03

Source checked 2026-10-03 14:49 UTC

Products compared

Pickoryx may earn a commission from qualifying purchases through the paid Amazon links on this page, at no added cost to you.

The buying question

Do your charging cables call for a USB-A port, or is a three-port USB-C layout with a higher stated shared-output ceiling a better fit?

A2697 lists a mixed three-USB-C/one-USB-A layout and a four-port 65/45/12/12W output profile. A2687 lists three USB-C ports and up to 160W across two or three ports. Neither headline total guarantees a particular device charging rate.

Quick verdict

Choose Anker Charger (140W, 4-Port; A2697) if

  • You need one USB-A socket for a device cable and want a four-port layout.
  • Your device set fits the A2697 four-port allocation of 65W, 45W, 12W and 12W.
View Anker Charger (140W, 4-Port; A2697) on AmazonPaid link

Choose Anker Prime Charger (160W, 3 Ports; A2687) if

  • All your device cables are USB-C and three ports cover the devices you intend to connect.
  • Your compatible USB-C devices benefit from the stated 160W total across two or three ports.
View Anker Prime Charger (160W, 3 Ports; A2687) on AmazonPaid link
When the recommendation changes
  • If any device requires USB-A, A2697 has one listed USB-A port; with A2687, use a compatible USB-C cable or check whether your adapter setup is suitable.
  • If you plan to use the A2687 150W single-port mode, Anker says it requires supported Anker devices and cables with AI Mode 2.0; do not assume every laptop receives 150W.
  • Before relying on a wattage profile, check the host charging input and cable rating; charging protocols and device limits can reduce the delivered rate.

The differences that matter

Port Mix And Host Accessory Compatibility

Anker Charger (140W, 4-Port; A2697)

The Anker Charger (140W, 4-Port; A2697) lists three USB-C ports and one USB-A port.[1]

Anker Prime Charger (160W, 3 Ports; A2687)

The Anker Prime Charger (160W, 3 Ports; A2687) lists three USB-C ports.[2]

What this changes: Choose by the cable ends on the devices you actually plug in: A2697 has a listed USB-A socket as well as USB-C, while A2687 lists three USB-C ports. A USB-A accessory cable will not plug directly into a USB-C port.[1, 2]

The better fit depends on your priorities

High Power Laptop And Shared Load Workflow

Anker Charger (140W, 4-Port; A2697)

A2697 is rated for 140W total. Its stated four-port profile is 65W on USB-C1, 45W on USB-C2, and 12W each on USB-C3 and USB-A; that combination totals 134W.[1]

Anker Prime Charger (160W, 3 Ports; A2687)

A2687 is rated for 160W total with two or three ports in use. Its listed single-port profiles go up to 150W, but Anker limits the 150W mode to supported Anker devices/cables in AI Mode 2.0; ordinary device results depend on the host and cable.[2]

What this changes: For a planned laptop-plus-accessories load, compare the actual per-port allocation and number of devices—not just the headline total. A2697 documents a four-port 65/45/12/12W map; A2687 offers up to 160W across two or three USB-C ports. The figures are manufacturer output profiles, not measured charging times.[1, 2]

The better fit depends on your priorities

Best for your routine

Connecting a device through a USB-A cable without changing its cable or adding an adapter

Best fit: Anker Charger (140W, 4-Port; A2697)

Based on listed features, not comparative testing.

A2697 lists a USB-A port; A2687 lists three USB-C ports. Confirm each device cable before choosing.

View Anker Charger (140W, 4-Port; A2697) on AmazonPaid link

A USB-C-only setup that uses two or three ports and prioritizes a higher listed shared-output ceiling

Best fit: Anker Prime Charger (160W, 3 Ports; A2687)

Based on listed features, not comparative testing.

Anker lists up to 160W total with two or three A2687 ports in use; the actual allocation and device input limits still apply.

View Anker Prime Charger (160W, 3 Ports; A2687) on AmazonPaid link

Value and trade-offs

One or both observed offers have eligibility conditions, so no unrestricted price difference is shown.

Compare current checkout offers against the port mix and shared-load profile you actually need; no current price advantage is established here.

Insufficient price history is available for a buy-now or wait recommendation; compare current checkout offers and package contents when purchasing.

Limitations

  • No comparative charging-time, thermal, safety, durability or reliability test was performed; published power profiles are manufacturer ratings, not measured device results.
  • A connected laptop or phone may draw less than a charger output profile based on its own charging input, protocol, battery state and cable. Check those specifications before purchase.
  • A2687’s 150W single-port profile is conditional on supported Anker devices/cables and AI Mode 2.0. Do not assume every USB-C laptop can receive 150W.
  • The Anker guide already offers a broad model-selection overview; this comparison narrows the choice to A2697 and A2687 by mapping their exact port layouts and documented multi-device output profiles.
  • No live offer comparison is included.

Questions shoppers ask

Does the A2697 have a USB-A port?

Yes. Anker’s A2697 specification lists three USB-C ports and one USB-A port. The A2687 specification lists three USB-C ports. Check the cable ends on your devices before choosing.

Does the A2687 deliver 160W to one laptop?

Anker lists 160W as the total output across two or three ports. Its 150W single-port profile is conditional on supported Anker devices and cables in AI Mode 2.0; confirm the laptop’s input and cable before expecting a particular rate.

Methodology and sources

Compared the official port layouts and the manufacturers’ stated output combinations for one through four connected devices. The recommendation is conditional on the buyer’s cable mix, device input and intended number of ports; no charging-speed result is inferred.

AI assistance organized and checked the cited manufacturer documentation; no product testing was performed.

View 2 sources
  1. 1.Specification of Anker 140W Charger A2697Anker Support · Official specifications · Source checked 2026-10-03 14:49 UTC
    Evidence used on this page
    • Specifications: port count and output profiles for one, two, three and four ports in use.: Identifies the A2697 model and lists three USB-C plus one USB-A port. It gives 140W total output and the stated per-port combinations, including 65W + 45W + 12W + 12W with all four ports in use.
  2. 2.Anker Prime Charger (160W, 3 Ports, Smart Display) — Anker USAnker US · Official specifications · Source checked 2026-10-03 14:49 UTC
    Evidence used on this page
    • Specifications: total ports and output; model number; note on conditional 150W output and AI Mode 2.0.: Names model A2687, lists three USB-C ports, 160W total output and up to 160W with two or three ports in use. Anker notes that 150W single-port output is conditional on supported products/cables and AI Mode 2.0.

Continue comparing