Which Anker magnetic battery fits your phone and carry setup?
The 633 is the capacity-and-connection choice on paper: Anker lists 10,000mAh, USB-C and USB-A outputs, and 7.5W maximum wireless output. The 622 lists 5,000mAh, a single USB-C output, 12W maximum total output, and the same 7.5W wireless ceiling. Anker limits the 622's wireless charging to iPhone 12 and later and says it is not compatible with Android; the 633 page recommends an iPhone-compatible magnetic case for best results but does not establish Android compatibility. Both have a foldable stand; the 622 is listed 0.21 inches thinner. These are manufacturer specifications, not measured charge counts or speed results.
Published by Pickoryx · Published 2026-10-04
Source checked 2026-10-04 11:26 UTC
Products compared

Product A · ASIN B09NRG4GK3
Anker 633 Magnetic Battery (A1641)
Last observed offer
$59.99
Per listed package.
Offer eligibility must be confirmed on Amazon.
Checked 2026-10-19 13:03 UTC. Price and availability may change.

Product B · ASIN B0B466YTT3
Anker 622 Magnetic Battery (MagGo; A1614)
Last observed offer
$35.99 List Price: $47.99
Per listed package.
Prime membership required for this observed offer.
Checked 2026-10-19 16:47 UTC. Price and availability may change.
Pickoryx may earn a commission from qualifying purchases through the paid Amazon links on this page, at no added cost to you.
The buying question
Is the 633’s higher stated capacity and extra wired output useful enough for your devices, or is the thinner 622 adequate for your routine?
The 633 lists 10,000mAh capacity and USB-C plus USB-A outputs; the 622 lists 5,000mAh, a single USB-C output and a thinner body. Both list up to 7.5W wireless output and a foldable stand, but the 622's wireless charging is listed for iPhone 12 and later and is not compatible with Android phones. The 633 page recommends an iPhone-compatible magnetic case for best results and does not establish Android compatibility.
Quick verdict
Choose Anker 633 Magnetic Battery (A1641) if
- You need the higher 10,000mAh rated capacity and the option of USB-C or USB-A wired output.
- The 633’s listed 0.71-inch thickness fits your intended storage space.
Choose Anker 622 Magnetic Battery (MagGo; A1614) if
- The 5,000mAh capacity and one USB-C wired output match your planned use.
- The listed 0.50-inch thickness is useful for a specific case or bag clearance you have measured.
When the recommendation changes
- If you plan to use wireless charging, check the phone and case against Anker's exact compatibility notes. The 622 is listed for iPhone 12 and later and is not compatible with Android; the 633 page recommends an iPhone-compatible magnetic case for best results but does not establish Android compatibility.
- If USB-A is required, the 633 page lists a USB-A port; if not, compare the 622’s single USB-C wired output against your device requirements.
The differences that matter
Capacity And Output Allocation
Anker 633 Magnetic Battery (A1641)
10,000mAh rated capacity; one USB-C and one USB-A output. The U.S. product page lists USB-C output at 5V/3A or 9V/2.22A, USB-A at 5V/3A or 9V/2A, and 7.5W maximum wireless output; it separately lists total output as 5V/3.6A maximum. For wireless use, the page recommends an iPhone-compatible magnetic case for best results; it does not establish Android compatibility. These are published ratings, not simultaneous-port test results.[1]
Anker 622 Magnetic Battery (MagGo; A1614)
5,000mAh rated capacity; one USB-C port with 5V/2.4A output and 12W maximum total output. Anker lists 7.5W maximum wireless charging for iPhone 12 and later and says this model is not compatible with Android phones.[2]
What this changes: Choose by the amount and connection mix you need: the 633 has twice the stated capacity and adds a USB-A output, while the 622 is rated for a single USB-C wired output. Both list up to 7.5W wireless output, but compatibility is not interchangeable: Anker lists the 622 for iPhone 12 and later and says it is not compatible with Android; the 633 page recommends an iPhone-compatible magnetic case for best results without establishing Android compatibility.[1, 2]
Physical Fit And Stand Use
Anker 633 Magnetic Battery (A1641)
Published dimensions are 4.21 × 2.61 × 0.71 inches. The A1641 page describes a dedicated foldable stand for hands-free phone viewing.[1]
Anker 622 Magnetic Battery (MagGo; A1614)
Published dimensions are 4.13 × 2.62 × 0.50 inches. The 622 U.S. page lists a foldable stand feature.[2]
What this changes: The 622 is listed 0.21 inches thinner, while the two listed footprints are close in length and width; both offer a foldable stand. Check your own case or bag clearance against the published dimensions rather than treating either as universally easier to carry or use.[1, 2]
Best for your routine
A routine that benefits from more rated capacity and both USB-C and USB-A wired output options
Best fit: Anker 633 Magnetic Battery (A1641)
Based on listed features, not comparative testing.
The 633 page lists a 10,000mAh capacity and both output types; the 622 page lists 5,000mAh and one USB-C port. This describes the published port and capacity fit, not observed charging speed or device charge counts.
Meeting a measured thickness clearance while retaining a foldable stand
The better fit depends on your priorities
The 622 is listed at 0.50 inches thick and the 633 at 0.71 inches; both list a foldable stand. Check the dimensions against the specific space rather than assuming a universal carry advantage.
Value and trade-offs
One or both observed offers have eligibility conditions, so no unrestricted price difference is shown.
Any price difference should be weighed against the 633’s additional stated capacity and USB-A port; neither feature is useful to every phone setup.
There is not enough current price history here to recommend buying now or waiting; compare the current offers and terms when shopping.
Limitations
- No hands-on comparison or independent matched test was performed. Manufacturer ratings do not establish actual charge counts, charging speed, simultaneous maximum output, heat, reliability or compatibility beyond the specific phone/case guidance stated here.
- Both manufacturer pages list 7.5W maximum wireless output and a foldable stand, but the wireless compatibility notes differ: the 622 is for iPhone 12 and later and is not compatible with Android, while the 633 page recommends an iPhone-compatible magnetic case and does not establish Android compatibility. No advantage for either in the shared stand or wireless rating is established here.
- Anker's current U.S. page lists the A1641 in Interstellar Gray, Dolomite White and Misty Blue rather than Black. If you are considering a Black Anker 633 listing, verify that it identifies model A1641 before ordering. Specifications here are for model A1641, not finish-specific testing.
- Dimensions are manufacturer-listed measurements. They do not establish comfort, pocket fit or which model fits every bag.
Questions shoppers ask
Which phones are supported for wireless charging?
Anker says the 622's 7.5W wireless charging is for iPhone 12 and later and that the 622 is not compatible with Android phones. For the 633, Anker recommends an iPhone-compatible magnetic case for best results; its page does not establish Android compatibility. Check the exact phone and case before relying on wireless charging.
Does the 633 charge wirelessly faster than the 622?
The Anker U.S. pages list a 7.5W maximum wireless output for both, but the 622 is limited to iPhone 12 and later and is not compatible with Android. The 633 page recommends an iPhone-compatible magnetic case and does not establish Android compatibility. The sources do not establish a wireless-speed advantage for either model.
Do both models include a stand?
Anker describes a dedicated foldable stand on the 633 page and lists a foldable stand feature on the 622 page. Stand presence alone does not distinguish these two models.
Methodology and sources
Compared manufacturer-listed capacity, output-port allocation, dimensions and stand presence. Shared wireless-output and foldable-stand features are identified as shared; ratings are not presented as measured charging results.
AI assistance supported research and drafting from the cited Anker U.S. product and support pages. No hands-on testing was performed.
View 3 sources
- 1.Anker 633 Magnetic Battery - Anker USAnker · Official specifications · Source checked 2026-10-04 11:26 UTC
Evidence used on this page
- Model name and identity at lines 11 and 221–223; capacity, ports, output ratings, wireless ceiling and dimensions at lines 27–64; foldable stand at lines 229–231; dimensions and weight at lines 252–255.: Anker's U.S. page identifies model A1641 as the Anker 633 Magnetic Battery and publishes capacity, port ratings, wireless output, dimensions and foldable-stand information. The listed finishes on this page are Gray, White and Blue; Black is not shown.
- 2.Anker 622 Magnetic Battery (MagGo) - Anker USAnker · Official specifications · Source checked 2026-10-04 11:26 UTC
Evidence used on this page
- Product name at lines 4 and 9; capacity, port count, input/output and dimensions at lines 25–45; selectable Interstellar Gray color at lines 46–51; foldable-stand feature at lines 171–179; wireless maximum in FAQ at lines 205–207.: Anker's U.S. page identifies the 622 Magnetic Battery (MagGo) and lists 5,000mAh, one USB-C port, 12W maximum total output, dimensions, foldable stand and 7.5W maximum wireless charging for iPhone 12 and later. The page states that the 622 is not compatible with Android phones and lists Interstellar Gray.
- 3.Anker 622 Magnetic Battery (MagGo) Upgraded Version User Guide (A1614)Anker Support · Official support · Source checked 2026-10-04 11:26 UTC
Evidence used on this page
- Guide title and model identifier at lines 4–8; U.S. support contact at lines 18–26.: Anker Support identifies the 622 Magnetic Battery (MagGo) Upgraded Version as model A1614; used for the model-name bridge only, not for product specifications.