Skip to content
Pickoryx

Hamilton Beach 11559 vs CHI 11600: Choose Your Pressing Method

Choose Hamilton Beach 11559 for board-supported pressing and a 300 mL tank. Choose CHI 11600 for its board-free clamp press if you accept a 200 mL tank and a different pressing motion.

Published by Pickoryx · Published 2026-10-07

Source checked 2026-10-07 15:04 UTC

Products compared

Pickoryx may earn a commission from qualifying purchases through the paid Amazon links on this page, at no added cost to you.

The buying question

Is board-supported pressing with more stored water preferable to a board-free clamp press?

A larger reservoir and familiar board setup versus two-sided clamp pressing with a smaller reservoir.

Quick verdict

When the recommendation changes
  • If you only want vertical steaming, the pressing distinction matters less; compare capacity and current offers.
  • If your garment label prohibits the intended treatment, neither pressing method overrides that restriction.

The differences that matter

Pressing Support And Motion

Hamilton Beach Durathon 11559

A single faceplate for horizontal pressing on an ironing board.[1]

CHI SteamPress 11600

Two pressing plates clamp the fabric; hold it taut and draw the unit toward the edge.[3, 4]

What this changes: Choose the Hamilton Beach for board-supported pressing. Choose the CHI if pressing without a board matters and you are willing to use its clamp-and-pull technique.[1, 3, 4]

The better fit depends on your priorities

Water Reservoir Capacity

Hamilton Beach Durathon 11559

300 mL removable reservoir.[1]

CHI SteamPress 11600

200 mL reservoir.[3]

What this changes: Hamilton Beach holds more water per fill. This is a capacity advantage, not proof of longer runtime under matching conditions.[1, 3]

Best fit: Hamilton Beach Durathon 11559View Hamilton Beach Durathon 11559 on AmazonPaid link

Best for your routine

Pressing with an existing ironing-board setup

Best fit: Hamilton Beach Durathon 11559

Based on listed features, not comparative testing.

The Hamilton Beach supports that flat-pressing workflow and offers the larger tank.

View Hamilton Beach Durathon 11559 on AmazonPaid link

Pressing when you do not want to set up an ironing board

Best fit: CHI SteamPress 11600

Based on listed features, not comparative testing.

The CHI supplies opposing plates. You still position and tension each section of fabric as you draw it through.

View CHI SteamPress 11600 on AmazonPaid link

Value and trade-offs

One or both observed offers have eligibility conditions, so no unrestricted price difference is shown.

If the CHI costs more, pay that difference only if its pressing method solves a setup problem for you. Capacity alone favors Hamilton Beach.

Price history is insufficient for a purchase-timing recommendation.

Limitations

  • No comparable hands-on testing establishes a wrinkle-removal, runtime, steam-output, heat-up, comfort or durability winner.
  • Hamilton Beach: attach the delicate-fabric cover only when unplugged and cool, and use it only on DELICATE.
  • CHI: avoid pressing over zippers, pins, metal rivets and snaps. Follow garment-care instructions with either model.
  • Travel wording is not confirmation of overseas electrical compatibility; check the exact unit rating and destination requirements.

Questions shoppers ask

Does the CHI remove all garment-handling work?

No. Its guide directs you to place a section between the plates, hold the fabric taut, and pull the unit toward the edge. Avoid metal fasteners. Choose it for the board-free method, not a promise of automatic pressing.

Methodology and sources

Compared pressing setup, reservoir capacity and garment-care constraints for the exact models.

AI assisted source research, comparison and drafting.

View 4 sources
  1. 1.Durathon 3-in-1 Steamer/Iron, model 11559Hamilton Beach · Official specifications · Source checked 2026-10-07 15:04 UTC
    Evidence used on this page
    • Model label; Details: Versatile 3 in 1; Long steam time: Identifies 11559, board-supported horizontal pressing and removable 300 mL reservoir.
  2. 2.Steamer/Iron Use and Care, 840376303Hamilton Beach · Official specifications · Source checked 2026-10-07 15:04 UTC
    Evidence used on this page
    • PDF page 1: garment-label note and steam instructions 8; page 2: model/electrical table: Care restrictions for the cover and garment label. The model table expressly includes 11559 and 11561.
  3. 3.CHI SteamPress 3-in-1 Handheld Garment Steamer and Iron (11600)CHI · Official specifications · Source checked 2026-10-07 15:04 UTC
    Evidence used on this page
    • Model label; Ditch the ironing board; Plenty of steam time: Identifies 11600, dual-sided clamping without an ironing board and 200 mL reservoir.
  4. 4.SteamPress Use and Care, 840375100CHI · Official specifications · Source checked 2026-10-07 15:04 UTC
    Evidence used on this page
    • Printed pages 7–9: How to Steam, How to Press, Care and Cleaning: Garment-label restrictions; clamp-and-pull pressing steps; avoid metal fasteners; empty and dry reservoir after use.

Continue comparing