Skip to content
Pickoryx

Omada EAP720 vs EAP225-Outdoor: Mounting and Power

Choose EAP720 for a dry indoor ceiling, wall or junction-box installation; choose EAP225-Outdoor for an exposed wall or pole. Then check the power feed: their documented PoE options differ, and the outdoor model’s included injector must stay dry indoors.

Published by Pickoryx · Published 2026-10-11

Source checked 2026-10-11 03:46 UTC

Products compared

Pickoryx may earn a commission from qualifying purchases through the paid Amazon links on this page, at no added cost to you.

The buying question

Which model fits your mounting site and existing power feed?

EAP720 offers a ceiling/wall/junction-box installation with a local DC option; EAP225-Outdoor suits an exposed wall or pole but still needs a protected power-source location.

Quick verdict

Choose Omada EAP720 if

  • You want the documented indoor mounting options and can supply 802.3at PoE or use the listed DC adapter near an outlet.
View Omada EAP720 on AmazonPaid link
When to skip: Your planned site cannot meet either model’s mounting and power-source requirements.
When the recommendation changes
  • Your site is exposed to weather rather than protected indoors.
  • Your existing Ethernet power source does not match the chosen model.
  • The delivered hardware revision or package differs from the documentation checked here.

The differences that matter

Mounting And Exposure

Omada EAP720

Ceiling, wall or junction-box mounting; the guide says to avoid water and humidity.[1, 3]

Omada EAP225-Outdoor

Wall or pole mounting with an IP65 enclosure. The injector is for dry indoor use only.[4]

What this changes: Match the access point to the site first. For an exposed wall or pole, choose the EAP225-Outdoor and follow its cable-sealing and grounding instructions; its outdoor enclosure does not protect the separate power injector.[1, 3, 4, 6]

The better fit depends on your priorities

Power Feed And Startup Equipment

Omada EAP720

802.3at PoE or 12V/1.5A DC; the US package lists a power adapter.[1]

Omada EAP225-Outdoor

802.3af PoE or 24V passive PoE; the US package lists a passive injector and power cord.[4]

What this changes: Check the actual switch or injector output before buying. The listed EAP720 DC option needs an accessible nearby outlet; the EAP225-Outdoor injector needs a dry indoor location. Do not assume an existing passive feed is suitable for the EAP720.[1, 4, 3, 6]

The better fit depends on your priorities

Best for your routine

Indoor junction-box or ceiling location with a nearby outlet

Best fit: Omada EAP720

Based on listed features, not comparative testing.

EAP720 has the documented mounting options and a listed DC adapter. Allow for both the Ethernet connection and the local power lead.

View Omada EAP720 on AmazonPaid link

Exposed outdoor wall or pole

Best fit: Omada EAP225-Outdoor

Based on listed features, not comparative testing.

EAP225-Outdoor is the documented fit, provided the cable entry is sealed and grounding instructions are followed. Keep its injector dry indoors.

View Omada EAP225-Outdoor on AmazonPaid link

Reusing an existing Ethernet power feed

The better fit depends on your priorities

Read the source’s label and specifications. Match them to the chosen model; a cable that powered the old access point is not by itself a compatibility check.

Value and trade-offs

One or both observed offers have eligibility conditions, so no unrestricted price difference is shown.

Compare the total installation cost, including any needed power equipment and cabling, after confirming site fit. A lower access-point price does not resolve an unsuitable power feed.

The available price evidence is insufficient for a purchase-timing recommendation.

Community discussions

Questions and individual experiences add context, not controlled-test results, failure rates, or owner consensus.

Planning Wi-Fi and Ethernet for a shed

A prospective EAP720 buyer asks about powering an access point in a steel shed and connecting a printer. For a similar project, settle the mounting location and power plan first, then verify the exact network configuration separately. This cached discussion does not establish mesh, Ethernet-bridge compatibility or range.

Reddit discussion · Applies to Omada EAP720 · Source checked 2026-10-11 03:42 UTC

Limitations

  • This comparison covers installation and power fit, not a measured Wi-Fi speed, coverage, security or reliability winner. Pickoryx did not test either access point.
  • The checked guides are US V1 for EAP720 and US V3 for EAP225-Outdoor. The delivered hardware revisions are unknown; verify the labels, package and matching manuals. The US product pages list the power accessories described here, but the delivered boxes were not inspected.
  • Outdoor installation requires the full manufacturer instructions, including cable sealing and grounding. An IP65 access point does not make its injector weatherproof.

Questions shoppers ask

Can I move the EAP225-Outdoor passive injector to an EAP720?

Do not assume that will work. The EAP225-Outdoor page lists 24V passive PoE, while EAP720 lists 802.3at PoE or 12V/1.5A DC. Use power equipment approved for the exact EAP720 revision, rather than transferring the injector just because the connector fits.

Does the outdoor model need an electrical outlet beside the access point?

Its documented power options deliver power over Ethernet. When using the included injector, plan an accessible earthed outlet and a dry indoor position for the injector, with the Ethernet run to the access point installed according to the guide. Do not place the injector outdoors on the strength of the access point’s IP65 rating.

What should I check before placing the order?

Confirm the exact US model and hardware revision, the included adapter or injector, the mounting surface, and the output of your existing power equipment. Use the matching guide to check the cable route, sealing and grounding needs before committing to the installation.

Methodology and sources

Compared the US product specifications, listed package contents and explicitly versioned installation guides for mounting, exposure and power requirements.

AI assisted source research, drafting and editing. Pickoryx did not install, use or test either product.

View 6 sources
  1. 1.EAP720: US specifications and packageOmada by TP-Link · Official specifications · Source checked 2026-10-11 03:42 UTC
    Evidence used on this page
    • lines 384–394, 443–453: Exact US EAP720 model and power-adapter package; page does not label hardware revision.
  2. 2.EAP720(US) V1 installation-guide support pageOmada by TP-Link · Official specifications · Source checked 2026-10-11 03:43 UTC
    Evidence used on this page
    • Document title and linked installation guide: Explicit EAP720(US)_V1 installation-guide landing, links actual PDF below.
  3. 3.EAP720 installation guide, REV1.0.0Omada by TP-Link · Official specifications · Source checked 2026-10-11 03:42 UTC
    Evidence used on this page
    • PDF pages 1–2, lines 2–3, 40, 53–64, 100–104: US V1 support-linked guide; EAP720 is example, regional accessory caveat. Do not assert delivered ASIN hardware V1.
  4. 4.EAP225-Outdoor: US specifications and packageOmada by TP-Link · Official specifications · Source checked 2026-10-11 03:42 UTC
    Evidence used on this page
    • lines 328–374, 417–424, 481–501: Exact US EAP225-Outdoor model; opened current route renders same older specifications as explicit /v1/ route. Does not establish ASIN hardware revision.
  5. 5.EAP225-Outdoor(US) V3 installation-guide support pageOmada by TP-Link · Official specifications · Source checked 2026-10-11 03:43 UTC
    Evidence used on this page
    • Document title and linked installation guide: Explicit EAP225-Outdoor(US)_V3 installation-guide landing; links actual PDF below.
  6. 6.EAP225-Outdoor installation guide, REV3.4.1Omada by TP-Link · Official specifications · Source checked 2026-10-11 03:42 UTC
    Evidence used on this page
    • PDF page 1 lines 29–105, 125; page 2 lines 137–166, 327–340: US V3 support-linked multi-model guide. EAP225-Outdoor explicitly named; EAP113/EAP110 exceptions must not transfer. Filename V1 is not hardware V1.