Skip to content
Pickoryx

UGREEN DXP4800 Plus vs DXP4800 GT: Which Network and Drive Layout Fits Your NAS?

The Plus documents one 10GbE port and one 2.5GbE port; the GT documents two 10GbE ports and link aggregation across multiple connections. Choose from the clients and network gear you plan to connect, then check the drive layout: GT U.2 drives in front bays 1/2 replace those bays’ SATA drives. Port counts do not predict file-copy speed.

Published by Pickoryx · Published 2026-10-22

Source checked 2026-10-22 09:27 UTC

Products compared

Pickoryx may earn a commission from qualifying purchases through the paid Amazon links on this page, at no added cost to you.

The buying question

Should your NAS have one 10GbE connection plus a 2.5GbE network port, or two 10GbE ports—and does your drive plan need U.2 in a front bay?

The Plus combines 10GbE and 2.5GbE for a mixed network; the GT provides a second 10GbE port and documents U.2 drives in bays 1/2, where they replace SATA drives.

Quick verdict

Choose UGREEN NASync DXP4800 Plus (diskless) if

  • Your planned network calls for one 10GbE connection and one 2.5GbE connection; the Plus documents that port mix. Check your clients and switch for the setup you plan to use.
  • Your planned pool uses the Plus’s listed four SATA bays and two M.2 slots without requiring U.2.
View UGREEN NASync DXP4800 Plus (diskless) on AmazonPaid link

Choose UGREEN NASync DXP4800 GT (diskless) if

  • You plan to connect a second 10GbE client or segment, or to use link aggregation across multiple connections with compatible network equipment.
  • You specifically want a compatible U.2 drive in front bay 1 or 2 and accept giving up that bay’s SATA drive.
View UGREEN NASync DXP4800 GT (diskless) on AmazonPaid link
When to skip: You need a unit with drives already installed; both models are diskless.
When the recommendation changes
  • If a second 10GbE client or network segment is part of your setup, the GT has a second 10GbE port; its link-aggregation description applies across multiple connections.
  • If your planned port mix is one 10GbE connection plus one 2.5GbE connection, the Plus documents that exact mix. Check compatibility with your clients and switch before choosing by topology.

The differences that matter

Network Topology And Client Requirements

UGREEN NASync DXP4800 Plus (diskless)

The DXP4800 Plus has one 10GbE RJ45 port and one 2.5GbE RJ45 port.[1]

UGREEN NASync DXP4800 GT (diskless)

The DXP4800 GT has two 10GbE RJ45 ports. UGREEN says either port alone is a 10GbE link; using both with link aggregation requires a managed switch and provides up to 20Gbps aggregate bandwidth across multiple connections.[2]

What this changes: Match the documented ports to your planned clients and network gear: the Plus lists one 10GbE port plus one 2.5GbE port, while the GT lists two 10GbE ports and describes link aggregation across multiple connections. Check client, switch, cable, storage and workload requirements; port labels are not transfer-speed test results.[1, 2]

The better fit depends on your priorities

Drive Layout And Expansion Plan

UGREEN NASync DXP4800 Plus (diskless)

The DXP4800 Plus is diskless and lists four SATA bays plus two M.2 NVMe slots.[1]

UGREEN NASync DXP4800 GT (diskless)

The DXP4800 GT is diskless and lists four SATA bays plus two M.2 slots; compatible U.2 NVMe drives can be used in front bays 1/2 instead of the SATA drive in each occupied bay.[2]

What this changes: Plan the drive mix before choosing: both start with the same listed count of SATA bays and M.2 slots, while the GT documents an additional U.2 route in two front bays. A U.2 drive there replaces, rather than adds to, that bay’s SATA drive. UGREEN’s Plus page directs buyers who need U.2 to another model, so a required U.2 bay points to the GT; choose the Plus when four SATA bays plus two M.2 slots match the plan and U.2 is not required.[1, 2]

The better fit depends on your priorities

Best for your routine

One 10GbE workstation alongside devices on a 2.5GbE LAN

The better fit depends on your priorities

The Plus documents one 10GbE port and one 2.5GbE port, which directly matches those labeled connection needs. The GT documents two 10GbE ports and link aggregation across multiple connections. Confirm that the complete client and switch setup matches the layout you choose.

Two 10GbE client paths or a second 10GbE network segment

Best fit: UGREEN NASync DXP4800 GT (diskless)

Based on listed features, not comparative testing.

The GT has two separate 10GbE RJ45 ports. UGREEN says link aggregation on a managed switch can provide combined bandwidth across multiple connections; choose this layout when those additional connections fit your network plan.

View UGREEN NASync DXP4800 GT (diskless) on AmazonPaid link

Use a compatible U.2 NVMe drive in a main bay while retaining two M.2 slots

Best fit: UGREEN NASync DXP4800 GT (diskless)

Based on listed features, not comparative testing.

The GT documents U.2 support in front bays 1/2 alongside its two M.2 slots. Each U.2 drive occupies a bay that would otherwise hold a SATA drive.

View UGREEN NASync DXP4800 GT (diskless) on AmazonPaid link

Value and trade-offs

One or both observed offers have eligibility conditions, so no unrestricted price difference is shown.

A higher current offer is easier to justify when the second 10GbE path or the documented U.2 bay option solves a real network or drive-layout need. If neither matters, the Plus’s mixed 10GbE/2.5GbE ports may be the closer fit; compare the live offer for the exact diskless model and seller conditions.

Price history is not available here for a timing recommendation; compare the current offer for the exact diskless configuration and its seller and condition.

Limitations

  • Both models are diskless; compatible drives are purchased separately.
  • The manufacturer’s port and interface specifications do not establish copy speed. A working 10GbE path also depends on the client, adapter, switch or direct connection, cable, source and destination storage, file size and protocol.
  • The GT’s U.2 option uses front bay 1 or 2 in place of that bay’s SATA drive; it does not create an additional drive bay.
  • No matched network-transfer, transcoding, reliability or drive-performance tests were conducted.
  • UGREEN describes up to 20Gbps aggregate bandwidth with link aggregation across multiple connections. This is not a measured transfer-rate guarantee; single-client behavior depends on the client, network configuration and protocol. SMB Multichannel was not assessed.

Questions shoppers ask

Does link aggregation guarantee 20Gbps for one workstation transfer?

UGREEN describes up to 20Gbps aggregate bandwidth across multiple connections when the two ports use link aggregation with compatible network equipment. That is not a guarantee for one transfer or a tested result for your workstation; the source does not assess protocols such as SMB Multichannel. Confirm the client, switch and protocol setup you plan to use.

Does a U.2 drive add storage beside the GT’s four SATA bays?

No. UGREEN says a compatible U.2 drive can occupy front bay 1 or 2 instead of the SATA drive in that bay. The GT also has two M.2 slots, which are separate from those four front bays.

Methodology and sources

Compared the manufacturer-documented network port layouts and drive-slot options for the two exact US diskless models. No network-transfer or media-server benchmark was conducted.

Automation organized the source-backed comparison; no hands-on test was performed.

View 2 sources
  1. 1.10GbE 4-Bay UGREEN DXP4800 Plus NAS for Content CreatorsUGREEN America · Official specifications · Source checked 2026-10-22 09:27 UTC
    Evidence used on this page
    • Product heading and selected model, lines 368-405; FAQ “What is the difference between the DXP4800 Plus and DXP4800 GT?”, lines 697-701; FAQ “What do I need to get 10GbE transfer speeds?”, lines 703-712; “Is the DXP4800 Plus the right UGREEN NAS for my setup?”, lines 734-738; Specs, lines 743-759.: Identifies the US DXP4800 Plus as a diskless four-bay NAS. The exact page lists four SATA bays, two M.2 slots, one 10GbE port and one 2.5GbE port. Its model-specific comparison says the GT has two 10GbE ports and U.2 in bays 1/2; its setup FAQ says 10GbE requires a compatible end-to-end network and storage path and that real copy speed varies.
  2. 2.UGREEN DXP4800 GT 4-Bay NAS | Dual 10GbE, ECC & U.2UGREEN America · Official specifications · Source checked 2026-10-22 09:27 UTC
    Evidence used on this page
    • Product heading and selected model, lines 367-405; FAQ “How do the DXP4800 GT’s two 10GbE ports work?”, lines 887-891; FAQ “What does U.2 SSD support add compared with the internal M.2 slots?”, lines 894-897; Specs, lines 902-918.: Identifies the US DXP4800 GT diskless base configuration and lists four SATA bays, two M.2 slots and two 10GbE RJ45 ports. UGREEN says either port alone supports a 10GbE link; with a managed switch, link aggregation provides up to 20Gbps aggregate bandwidth across multiple connections. Compatible U.2 drives may occupy bays 1/2 in place of SATA drives.