Anker 737 A1289 vs A1695: Which Cable and Output Setup Fits?
Choose by the connections you will actually use. The A1289 lists two USB-C socket ports and one USB-A port, with a 140W total maximum and a USB-C profile up to 28V/5A; Anker says reaching 140W requires a PD 3.1 device and cable. The A1695 lists two built-in USB-C cables plus USB-C and USB-A ports, and its maximum changes with the number of connections: up to 100W from one USB-C, 165W across any two USB-C, and 130W maximum with three or four devices. Check your devices’ input requirements and cable support before choosing; these output ratings do not establish which will charge a particular device faster.
Published by Pickoryx · Published 2026-10-16
Source checked 2026-10-16 02:01 UTC
Products compared
Product A · ASIN B09VPHVT2Z
Anker 737 Power Bank (A1289)
Last observed offer
$109.99
Per listed package.
Offer eligibility must be confirmed on Amazon.
Checked 2026-10-19 16:47 UTC. Price and availability may change.
Product B · ASIN B0DCBB2YTR
Anker Laptop Power Bank A1695
Last observed offer
$119.98 List Price: $134.99
Per listed package.
Offer eligibility must be confirmed on Amazon.
Checked 2026-10-19 13:02 UTC. Price and availability may change.
Pickoryx may earn a commission from qualifying purchases through the paid Amazon links on this page, at no added cost to you.
The buying question
Should the listed socket layout of the A1289 or the A1695’s two built-in USB-C cables and documented multi-port output options better match the devices and cables you plan to use?
The A1289 lists two USB-C ports and one USB-A port, with 140W maximum total output and 28V/5A USB-C profiles. The A1695 adds two built-in USB-C cables alongside a USB-C port and USB-A port; its output limits vary with how many USB-C connections are used.
Quick verdict
Choose Anker 737 Power Bank (A1289) if
- The A1289’s two USB-C socket ports and one USB-A socket suit your planned connection layout, and your intended device/cable pair supports its listed USB-C profile.
Choose Anker Laptop Power Bank A1695 if
- You want two built-in USB-C cable options and expect to use the A1695 under one of its documented one-, two-, or multi-device output configurations.
When the recommendation changes
- The devices you plan to connect, their input protocols, and the cables you already own determine whether either listed port profile is useful to you.
- Your planned number of simultaneous connections changes which A1695 power-sharing limit applies; Anker lists different maxima for one USB-C connection, any two USB-C connections, and three or four devices.
The differences that matter
Cable And Port Layout
Anker 737 Power Bank (A1289)
Anker lists two USB-C ports and one USB-A port for the A1289.[1]
Anker Laptop Power Bank A1695
Anker lists two built-in USB-C cables, one retractable, plus one USB-C port and one USB-A port for the A1695.[2]
What this changes: The documented layouts answer a practical cable-handling question: A1289 presents three listed socket ports, while A1695 adds two built-in USB-C cable options as well as its USB-C and USB-A ports. This supports a connection-layout preference only.[1, 2]
Output Configuration
Anker 737 Power Bank (A1289)
Anker lists 140W maximum total output for A1289 and USB-C output profiles up to 28V/5A. Anker says 140W requires a PD 3.1-capable device and cable.[1]
Anker Laptop Power Bank A1695
Anker lists up to 100W from one A1695 USB-C connection, 165W maximum for any two USB-C connections, and 130W maximum when three or four devices are connected.[2]
What this changes: The figures answer how to plan connections, not which bank charges faster. A1289’s stated 140W maximum has a PD 3.1 device-and-cable condition; A1695’s maximum depends on using one USB-C, any two USB-C, or three/four devices. Match the configuration to the devices and cables in your setup.[1, 2]
Best for your routine
A buyer who prefers the listed A1289 socket-port arrangement and has verified that the intended device and cable support the needed input profile.
Best fit: Anker 737 Power Bank (A1289)
Based on listed features, not comparative testing.
Anker lists two USB-C ports and one USB-A port on the A1289, plus a 140W total maximum and a USB-C profile up to 28V/5A. The buyer still needs to verify their device and cable requirements.
A buyer who values built-in USB-C cables and has a planned device count that fits one of the A1695 output configurations.
Best fit: Anker Laptop Power Bank A1695
Based on listed features, not comparative testing.
Anker lists two built-in USB-C cables on the A1695 and specifies separate output maxima for single USB-C, any two USB-C, and three or four connected devices.
Value and trade-offs
One or both observed offers have eligibility conditions, so no unrestricted price difference is shown.
No price comparison is included. Compare current offers for the exact model and package you intend to buy.
No purchase-timing judgment is provided because this comparison does not include matched price-history evidence.
Limitations
- The comparison uses Anker’s published product specifications and configuration descriptions; no independent charging-speed or capacity test was performed.
- A listed maximum output does not establish that a particular laptop, phone, cable, or protocol can use that output. Check the connected device’s input specification and the cable rating.
- The output limits depend on the number and combination of connected devices. Anker lists 100W maximum for a single A1695 USB-C connection, 165W maximum for any two USB-C connections, and up to 130W maximum with three or four devices.
- No current price-history analysis or purchase-timing conclusion is included.
Questions shoppers ask
Does the A1695 have built-in cables?
Anker’s A1695 page lists two built-in USB-C cables, one retractable, alongside a USB-C port and a USB-A port. The A1289 page lists two USB-C ports and one USB-A port.
Does the A1695 provide 165W from every port or combination?
No. Anker lists up to 100W from one USB-C connection and 165W maximum across any two USB-C connections. Its page lists a 130W maximum when three or four devices are connected. These are configuration limits, not a charging-speed comparison.
What is needed to reach the A1289’s 140W maximum?
Anker says the device must support PD 3.1 input and the cable must support PD 3.1 to reach 140W. Verify the exact device and cable specifications.
Methodology and sources
Compared the manufacturers’ stated port and built-in-cable layouts, USB-C output profiles, and documented power limits by connected-device configuration. No charging-speed test, device compatibility test, or hands-on comparison was performed.
AI assisted with product research and writing; no hands-on testing was performed.
View 2 sources
- 1.Anker 737 Power Bank (PowerCore 24K) - Anker USAnker US · Official specifications · Source checked 2026-10-16 02:01 UTC
Evidence used on this page
- Product identity and specifications lines 13, 29–65, 224–247: model family, port counts, 140W maximum total output and USB-C profiles through 28V/5A. FAQ lines 263–265: requirement for a PD 3.1 device and cable to reach 140W. Charging guide lines 211–223: single-, two-, and three-port arrangements.: The Anker US page identifies the Anker 737 Power Bank (PowerCore 24K), lists two USB-C ports and one USB-A port, 140W maximum total output and USB-C profiles through 28V/5A, and states that a PD 3.1 device and cable are required to reach 140W.
- 2.Anker Laptop Power Bank (25K, 165W, Built-In and Retractable Cables) - Anker USAnker US · Official specifications · Source checked 2026-10-16 02:01 UTC
Evidence used on this page
- Product identity/specifications lines 13, 31–68 and 304: model A1695, two built-in USB-C cables (one retractable), USB-C/USB-A port counts and 100W per USB-C maximum. Output-configuration diagram/notes lines 223–272 and 371–372: 100W single USB-C, 165W maximum with any two devices/USB-C connections as specified, 130W maximum with three/four devices.: The Anker US page identifies model A1695, lists two built-in USB-C cables (one retractable), one USB-C port and one USB-A port, and gives different output maxima by connection configuration: 100W single USB-C, up to 165W with two devices, and up to 130W with three or four devices.