Skip to content

CyberPower CP1500PFCLCD vs CP1500AVRLCD3: Choose by Power Supply and Load

Both are 1500VA tower UPS models, but their documented choices differ: CP1500PFCLCD is rated at 1000W and explicitly lists pure sine wave output and Active PFC compatibility; CP1500AVRLCD3 is rated at 900W and its manual specifies simulated sine wave output. Choose based on the connected equipment's stated input requirements and measured load, then confirm the exact setup with the device and UPS manufacturers.

Published by Pickoryx · Published 2026-10-14

Source checked 2026-10-14 15:02 UTC

Products compared

Pickoryx may earn a commission from qualifying purchases through the paid Amazon links on this page, at no added cost to you.

The buying question

Should you pay for the CP1500PFCLCD's documented pure sine wave and 1000W rating, or is the CP1500AVRLCD3's 900W simulated-sine-wave design sufficient for your verified setup?

CP1500PFCLCD documents pure sine wave output, Active PFC compatibility, and a 1000W rating. CP1500AVRLCD3's exact-model manual specifies simulated sine wave and a 900W rating. Neither specification alone proves compatibility with a particular PSU or predicts runtime.

Quick verdict

Choose CyberPower CP1500PFCLCD PFC Sinewave UPS (model CP1500PFCLCDA) if

  • Your equipment documentation calls for or specifically favors a pure sine wave UPS, or you want CyberPower's stated Active PFC compatibility; confirm the exact power-supply requirement before buying.
  • Your measured connected load needs more than 900W but remains within the UPS's 1000W rating and VA limits; leave headroom and check your load.
When the recommendation changes
  • The connected equipment's manufacturer specifies a different UPS waveform or capacity requirement; follow that guidance over a general feature comparison.
  • The combined load approaches either model's rated limit, or you need a runtime estimate; obtain the exact load and use the manufacturer's model-specific runtime data.

The differences that matter

Waveform And Power Supply Requirement Fit

CyberPower CP1500PFCLCD PFC Sinewave UPS (model CP1500PFCLCDA)

CyberPower's exact CP1500PFCLCDa page describes pure sine wave output and explicitly lists Active PFC compatibility.[1]

CyberPower CP1500AVRLCD3 Intelligent LCD UPS

CyberPower's CP1350/1500AVRLCD3 manual identifies CP1500AVRLCD3 and specifies simulated sine wave on battery.[2]

What this changes: If a device's manufacturer requires a particular waveform or names an Active PFC condition, check that requirement against the UPS maker. CyberPower explicitly advertises Active PFC compatibility for the A model; the B model manual's simulated-wave statement does not by itself establish compatibility or incompatibility with any particular power supply.[1, 2]

The better fit depends on your priorities

Rated Output And Load Sizing

CyberPower CP1500PFCLCD PFC Sinewave UPS (model CP1500PFCLCDA)

CyberPower lists the CP1500PFCLCDa at 1500VA / 1000W.[1]

CyberPower CP1500AVRLCD3 Intelligent LCD UPS

The exact CP1500AVRLCD3 manual lists 1500VA / 900W; ENERGY STAR's model record also identifies CP1500AVRLCD3 at 1500VA / 900W.[2, 3]

What this changes: Both share a 1500VA rating, but the A model's published watt ceiling is 100W higher. Compare the devices' measured watts and VA with both limits and leave operating headroom; the rating difference does not predict how long either unit will run.[1, 2, 3]

Best fit: CyberPower CP1500PFCLCD PFC Sinewave UPS (model CP1500PFCLCDA)View CyberPower CP1500PFCLCD PFC Sinewave UPS (model CP1500PFCLCDA) on AmazonPaid link

Best for your routine

The device maker explicitly calls for pure sine wave output or states an Active PFC-related UPS requirement.

Best fit: CyberPower CP1500PFCLCD PFC Sinewave UPS (model CP1500PFCLCDA)

Based on listed features, not comparative testing.

CP1500PFCLCD is the only model in this pair whose reviewed CyberPower page explicitly states both pure sine wave output and Active PFC compatibility. Verify that the device maker's requirement maps to this specification; this is not a compatibility guarantee.

The verified equipment load is above 900W but no more than 1000W, and within the 1500VA limit.

Best fit: CyberPower CP1500PFCLCD PFC Sinewave UPS (model CP1500PFCLCDA)

Based on listed features, not comparative testing.

The documented watt ratings are 1000W for CP1500PFCLCD and 900W for CP1500AVRLCD3. Check the real combined load and headroom; neither rating should be treated as a runtime prediction.

Value and trade-offs

One or both observed offers have eligibility conditions, so no unrestricted price difference is shown.

Compare the current offer terms against your verified waveform needs and connected load. The documented 100W rating difference matters only if your measured load requires it.

Choose by verified equipment fit and current offer terms; a price-history-based timing recommendation is not supported.

Limitations

  • CyberPower's global page names CP1500PFCLCDa and lists a CP1500PFCLCDA UPS in the box; it says contents may vary by region. Check the documentation supplied for the unit sold in your market.
  • No controlled head-to-head electrical test was performed or reviewed. The sources do not establish actual output quality under load, device compatibility, failure rates, or runtime superiority.
  • Watt and VA ratings are separate limits. Check both against the real connected load and follow equipment-maker and UPS-manufacturer guidance; no safety or compatibility guarantee is made.

Questions shoppers ask

Are both models rated for 1500VA?

Yes. CyberPower lists both at 1500VA, but the documented watt limits differ: 1000W for CP1500PFCLCD and 900W for CP1500AVRLCD3. Check both the watts and VA for your load.

Does CP1500AVRLCD3 definitely work with my Active PFC power supply?

This comparison cannot confirm that for a specific PSU. CyberPower explicitly describes CP1500PFCLCD as Active PFC compatible, while the CP1500AVRLCD3 manual specifies simulated sine wave output. Check your power-supply maker's instructions and ask CyberPower about the exact PSU model.

Which one will keep my computer running longer?

The reviewed documents do not establish a direct runtime winner. Runtime depends on the actual load and other conditions; consult each manufacturer's exact-model runtime data for your measured wattage.

Methodology and sources

Compared the manufacturers' stated waveform and the two 1500VA watt ratings. Apply the guidance to the equipment maker's input requirements and the actual connected load.

Automation organized the manufacturers' stated waveform and load ratings into a feature-fit comparison; it did not test either UPS or connected equipment.

View 3 sources
  1. 1.CP1500PFCLCDa | CyberPowerCyberPower · Official specifications · Source checked 2026-10-14 15:00 UTC
    Evidence used on this page
    • Product heading and specifications identify CP1500PFCLCDa at 1500VA/1000W; feature list states pure sine wave output and Active PFC compatibility; package list names a CP1500PFCLCDA UPS. The page notes that contents can vary by region.: CyberPower's page names CP1500PFCLCDa and lists a CP1500PFCLCDA UPS in the box. The names differ only in the capitalization of the final a/A; the page states pure sine wave, Active PFC compatibility, and 1500VA/1000W. It notes that contents may vary by region.
  2. 2.CP1350/1500AVRLCD3 User ManualCyber Power Systems (USA), Inc. · Official specifications · Source checked 2026-10-14 15:02 UTC
    Evidence used on this page
    • Technical specifications identify the CP1500AVRLCD3 at 1500VA/900W and specify simulated sine wave output on battery.: CyberPower's US manual covers CP1500AVRLCD3 and specifies 1500VA/900W with simulated sine wave output on battery.
  3. 3.CyberPower CP1500AVRLCD3 ENERGY STAR Certified UPS recordENERGY STAR · Official support · Source checked 2026-10-14 15:01 UTC
    Evidence used on this page
    • The record identifies model CP1500AVRLCD3 and lists output ratings of 1500VA/900W.: ENERGY STAR identifies CP1500AVRLCD3 and lists its output rating as 1500VA/900W.