Sony ULT WEAR vs Soundcore Space One Pro: How Do Their Call and Fold Workflows Differ?
Both headsets support two-device multipoint, but each manufacturer says LDAC cannot be used while two devices are connected. The call workflows differ: Sony documents an app setting and a second-phone ring sequence; Soundcore documents headset-button actions for answering/rejecting a second-phone call and muting. Both brands publish fold instructions, but those steps do not establish which headset packs smaller or travels better. Case contents remain unconfirmed for the exact US packages.
Published by Pickoryx · Published 2026-10-07
Source checked 2026-10-07 14:13 UTC
Products compared
Product A · ASIN B0CWVX1GNX
Sony ULT WEAR (WH-ULT900N series)
Check Amazon for the current price and availability.
Product B · ASIN B0CZ8G716J
Soundcore Space One Pro (A3062)
Last observed offer
$139.99 List Price: $199.99
Per listed package.
Offer eligibility must be confirmed on Amazon.
Checked 2026-10-19 19:02 UTC. Price and availability may change.
Pickoryx may earn a commission from qualifying purchases through the paid Amazon links on this page, at no added cost to you.
The buying question
Which documented call controls, two-device behavior, and fold sequence fit your routine, and what should you verify if an included carrying case matters?
Both manufacturers document multipoint, and both state LDAC is unavailable while two devices are connected. Sony documents an app-enabled setup and how a second-phone call is signaled; Soundcore documents button-based call actions for a second phone. Both publish different fold steps. The exact US retail package case contents are not settled for either model.
Quick verdict
Choose Sony ULT WEAR (WH-ULT900N series) if
- You prefer Sony’s documented app path for enabling multipoint and its second-phone ring-notification sequence; LDAC is unavailable in multipoint.
- You prefer Sony’s written flatten-and-fold steps; verify the exact seller package if you need a case.
Choose Soundcore Space One Pro (A3062) if
- You want Soundcore’s documented headset-button actions for muting and managing an incoming call on a second connected phone; LDAC is unavailable in multipoint.
- You prefer Soundcore’s labeled fold sequence; verify the exact seller package if you need a case.
When the recommendation changes
- If microphone sound quality is the deciding factor, these sources do not provide comparable microphone measurements; listen to applicable independent call samples before choosing.
- If a protective travel case must be included, verify the exact package with the US seller because Sony’s official guide and US box list differ and the checked Soundcore US pages do not settle inclusion.
The differences that matter
Microphone And Call Workflow
Sony ULT WEAR (WH-ULT900N series)
Quick double tap on touch panel answers or ends a call; Sony describes an omnidirectional call microphone. No microphone quality measurement established.[1]
Soundcore Space One Pro (A3062)
One press answers/ends a call; two-second hold rejects a call or toggles mute/unmute.[4]
What this changes: The explicit Soundcore mute gesture may matter in meetings; Sony's guide establishes answer/end but not an absence of headset mute. No sound-quality winner is supported.[1, 4]
Microphone And Call Workflow
Sony ULT WEAR (WH-ULT900N series)
Sony says to enable two-device connection in Headphones Connect and describes waiting for calls on two smartphones. Sony states LDAC cannot be used with this setting and automatically switches to AAC or SBC.[1]
Soundcore Space One Pro (A3062)
Soundcore says to double-press power after the first device connects, then pair a second. Its FAQ documents answering or rejecting a second-phone incoming call while another call is active. Soundcore states that with LDAC on, the headphones cannot connect to two devices at once.[5, 4, 6]
What this changes: Both brands document multipoint and the same LDAC trade-off: LDAC must be off while two devices are connected. Choose between their documented setup and call-handling workflows—Sony’s app-enabled setting and ring-notification sequence, or Soundcore’s button-based second-call actions. This does not establish that either model has better call quality or that one lacks an undocumented equivalent.[1, 5, 4, 6]
Travel Fold And Carry Case Workflow
Sony ULT WEAR (WH-ULT900N series)
Rotate left/right units flat and fold a unit toward the headband before storing, according to the guide.[1]
Soundcore Space One Pro (A3062)
Align L/R marks, fold the left panel, rotate the right panel to the logo, then align it with the left, according to Soundcore's guide.[3]
What this changes: Both offer manufacturer-published fold steps; no comparative packed-size test was established.[1, 3]
Travel Fold And Carry Case Workflow
What this changes: Verify the seller's exact package if case inclusion affects the purchase; do not treat official-page silence as evidence that no case is included.[1, 2, 3, 4]
Best for your routine
You prefer Sony’s app-enabled multipoint setup and its documented second-phone ring-notification sequence
Best fit: Sony ULT WEAR (WH-ULT900N series)
Based on listed features, not comparative testing.
Sony’s guide describes enabling multipoint in Headphones Connect and the ring sequence when another phone receives a call during an active call. Soundcore documents different button actions for a second-phone call. Both manufacturers state LDAC is unavailable in multipoint; this is workflow fit, not a quality result.
You want Soundcore’s documented headset-button actions for muting or handling a second-phone call
Best fit: Soundcore Space One Pro (A3062)
Based on listed features, not comparative testing.
Soundcore’s FAQ documents a two-second hold to toggle mute and specific actions for a second-phone incoming call. This describes the documented workflow, not an absence of equivalent Sony controls.
What the evidence cannot decide
- Best microphone sound in calls: Official feature descriptions do not compare captured voice quality, and no applicable controlled head-to-head measurement was available for this result.
Value and trade-offs
One or both observed offers have eligibility conditions, so no unrestricted price difference is shown.
Compare current offers at the time you shop; a higher offer should be justified by the call workflow or travel features you will actually use, not by an unsupported microphone-quality or case-inclusion assumption.
Available price information is a current-only observation; no purchase-timing conclusion can be drawn.
Limitations
- No comparable controlled microphone recording or call-quality measurement for these exact models was established; mic quality remains unranked.
- Sony's ULT WEAR guide lists a carrying case, while Sony USA's WH-ULT900N box list omits it. This is unresolved for the exact US Black retail item; verify with the seller.
- The checked Soundcore US product and support pages do not establish included case contents for the US Jet Black retail package.
- Folding instructions establish handling steps, not a measured packed-size or durability advantage.
Questions shoppers ask
Can both stay connected to two devices for calls?
Both manufacturers document multipoint, and both say LDAC cannot be used while two devices are connected: Sony says its setting switches the codec to AAC or SBC, and Soundcore says LDAC on prevents a two-device connection. Sony uses a Headphones Connect app setting and describes the second-phone ring sequence. Soundcore describes double-pressing power to add the second device and documents headset-button actions for a second-phone call.
Does either one definitely include a travel case in this exact US package?
That is not confirmed by the official pages checked. Sony's Help Guide lists a case, but its US specifications page's box list does not; the checked Soundcore US pages do not state the case contents. Verify the exact package with the seller.
Methodology and sources
Compared official product/support instructions for call controls, two-device setup and second-phone call handling, plus each manufacturer’s LDAC restriction during multipoint. Also compared documented folding steps and separately reported unresolved exact US case inclusion. No measured microphone-quality or packed-size advantage is claimed.
Research assistance checked official documentation and organized the stated call-control and folding workflows. Pickoryx did not conduct hands-on microphone or packing tests.
View 6 sources
- 1.ULT WEAR Help Guide (WH-ULT900N)Sony Corporation · Official specifications · Source checked 2026-10-07 14:13 UTC
Evidence used on this page
- Pages 9–10 (included items and case storage), 69–71 (multipoint and wired use), 94–97 (call operation); model WH-ULT900N/YY2981 family: Lists a carrying case and headphone cable among included items; documents folding/storing steps, two-device connection and call waiting, app setup, LDAC limitation in multipoint, wired use, and touch-panel call operations. Family-level guide; exact US box contents separately unresolved.
- 2.WH-ULT900N SpecificationsSony USA · Official support · Source checked 2026-10-07 14:13 UTC
Evidence used on this page
- General Features (microphone direction/type); What's In The Box: Sony USA identifies the WH-ULT900N/ULT WEAR family, lists its microphone type/direction and wired connection details; the US box list names connection cable, USB cable, warranty card and reference guide, omitting the case listed by the Help Guide.
- 3.soundcore Space One Pro | FlexiCurve Over-Ear HeadphoneSoundcore · Official specifications · Source checked 2026-10-07 14:13 UTC
Evidence used on this page
- Fold Guide and FlexiCurve Structure; A3062 product page with Jet Black selected: Shows the Jet Black Space One Pro product page and gives a fold sequence: align L/R marks, fold left panel, rotate right panel until the soundcore logo appears, then align the panels. No exact retail package/case contents established by checked product page.
- 4.soundcore Space One Pro Headphones FAQSoundcore Support · Official support · Source checked 2026-10-07 14:13 UTC
Evidence used on this page
- How to Manage Calls; Handling Calls on Two Phones: Documents one-press answer/end, two-second hold to reject or toggle mute, and handling a second-phone incoming call when connected to two phones. This establishes operation only, not call quality.
- 5.How to Enable Multipoint Connection for Space One ProSoundcore Support · Official support · Source checked 2026-10-07 14:13 UTC
Evidence used on this page
- Enable/disable multipoint steps: Says connect one device, double-press power, then pair the second; multipoint can be disabled in the soundcore app.
- 6.How to Enable LDAC for Space One ProSoundcore Support · Official support · Source checked 2026-10-07 14:13 UTC
Evidence used on this page
- LDAC instructions, step 1 (line 10): with LDAC on, Space One Pro cannot be connected to two devices at once.: Soundcore Support states that with LDAC enabled the Space One Pro cannot connect to two devices simultaneously. The same behavior documented by Sony means this codec limitation is shared; it does not distinguish the products.