Skip to content
Pickoryx

TempPro TP16S vs TP17: Which Probe Setup Fits Your Cooking?

Choose the TP16S for a single monitored target; choose the TP17 when you want two temperatures at once. The TP17's listed LCD is larger, while the TP16S has a documented one-touch backlight that turns off after 10 seconds. No cooking or accuracy winner is established here.

Published by Pickoryx · Published 2026-10-18

Source checked 2026-10-18 03:28 UTC

Products compared

Pickoryx may earn a commission from qualifying purchases through the paid Amazon links on this page, at no added cost to you.

The buying question

Is one probe enough for the temperatures you want to monitor, or would two simultaneous readings and a larger listed display be more useful?

The TP16S tracks one target and has a smaller listed LCD; the TP17 tracks two targets at once and has a larger listed LCD. The TP16S also has a specifically described one-touch backlight with a 10-second auto-off.

Quick verdict

Choose TempPro TempTrack CORE TP16S if

  • One wired reading at a time is enough for your usual roast, cut, or cooker setup.
  • You want the TP16S's documented one-touch orange backlight and 10-second auto-off.
View TempPro TempTrack CORE TP16S on AmazonPaid link

Choose TempPro TempTrack PLUS TP17 if

  • You want to monitor meat and cooker temperature together, or two cuts at once, without swapping between readings.
  • The TP17's stated 2.5-by-1.5-inch LCD better suits your preferred display size.
View TempPro TempTrack PLUS TP17 on AmazonPaid link
When the recommendation changes
  • If you do not need two simultaneous readings, the TP17's second probe may not add a useful capability for your routine.
  • If the TP17's lighting behavior is a deciding factor, verify it in the current manual; TempPro's category page calls the screen constantly lit, while the exact TP17 page only says backlit.

The differences that matter

Simultaneous Wired Reading Count

TempPro TempTrack CORE TP16S

One wired probe; TempPro says the TP16S tracks one target.[1]

TempPro TempTrack PLUS TP17

Two wired probes; TempPro says the TP17 can monitor two targets at once.[2]

What this changes: The TP16S fits a one-target-at-a-time setup. The TP17 can show meat plus oven or smoker temperature, or two cuts, in the same cook; choose it when that second reading would change how you monitor a meal.[3]

The better fit depends on your priorities

Screen Dimensions And Lighting Interaction

TempPro TempTrack CORE TP16S

Backlit LCD listed as 1.88 by 1.44 inches. The exact TP16S page says its orange backlight is activated with one touch and turns off after 10 seconds.[1]

TempPro TempTrack PLUS TP17

Backlit LCD listed as 2.5 by 1.5 inches. TempPro's leave-in collection describes the TP17 as constantly lit; the exact TP17 page describes a backlit LCD but does not specify its lighting duration or control.[2, 3]

What this changes: The published dimensions give the TP17 a larger stated display area. If you want to activate illumination only when needed, the TP16S page documents that interaction; the TP17's exact page does not specify equivalent behavior, so confirm the current manual if always-on lighting matters to you. This is a feature-description comparison, not a test of readability or brightness.[1, 2, 3]

The better fit depends on your priorities

Best for your routine

A cook who wants to track one food target at a time.

Best fit: TempPro TempTrack CORE TP16S

Based on listed features, not comparative testing.

The TP16S has one probe and is described by TempPro as tracking one target, which matches this narrower monitoring setup.

View TempPro TempTrack CORE TP16S on AmazonPaid link

A cook who wants meat and cooker temperature, or two cuts, displayed at the same time.

Best fit: TempPro TempTrack PLUS TP17

Based on listed features, not comparative testing.

The TP17 has two probes, and TempPro describes the two simultaneous-reading uses directly.

View TempPro TempTrack PLUS TP17 on AmazonPaid link

Value and trade-offs

One or both observed offers have eligibility conditions, so no unrestricted price difference is shown.

Any price difference is most relevant if you will use the TP17's second simultaneous reading or larger stated LCD; otherwise the TP16S's one-probe configuration may be sufficient for your planned setup.

No verified price-history window is available here, so compare current offers when you are ready to buy.

Limitations

  • This comparison uses TempPro's published product information; neither thermometer was hands-on tested here.
  • No independent, matched test establishes comparative accuracy, reading speed, cooking results, or real-world readability.
  • TempPro's collection describes the TP17 as constantly lit, but its exact TP17 product page only specifies a backlit LCD. Confirm the lighting behavior in the current manual if it is decisive.
  • TempPro's TP16S page contains different cord-length statements in separate sections; cord length is not used to distinguish these models here.

Questions shoppers ask

Can the TP17 monitor meat and grill temperature at the same time?

TempPro says the TP17's two probes can monitor meat and oven or smoker temperature, or two cuts, simultaneously. The TP16S is listed with one probe and is described as tracking one target.

Is the TP17 screen always lit?

TempPro's leave-in collection calls it constantly lit, while the TP17 product page describes a backlit LCD without specifying how long it stays illuminated. Check the current manual if that behavior matters to your setup.

Methodology and sources

Compared the exact TP16S and TP17 product pages with TempPro's U.S. leave-in thermometer choice guidance, focusing on simultaneous probe count and the stated display dimensions and lighting interaction. No performance measurements were made.

AI tools assisted source discovery, comparison drafting, and consistency checks; no hands-on testing was performed.

View 3 sources
  1. 1.TempTrack CORE TP16S Leave-In Meat Thermometer – TempProTempPro · Official specifications · Source checked 2026-10-18 03:28 UTC
    Evidence used on this page
    • Description and features; specifications, Number of Probes, Display Size, and One-Touch Backlight & Auto-Off: The exact TP16S page identifies the TempTrack CORE TP16S, lists one probe and a 1.88 by 1.44 inch backlit LCD, and describes one-touch orange backlight activation with a 10-second auto-off. Other cord-length statements on this page conflict, so no cord length is used.
  2. 2.TempTrack PLUS TP17 Leave-In Meat Thermometer with Dual Probes – TempProTempPro · Official specifications · Source checked 2026-10-18 03:28 UTC
    Evidence used on this page
    • Description and features; specifications, Number of Probes and Display Size: The exact TP17 page identifies the TempTrack PLUS TP17, lists two wired probes and a 2.5 by 1.5 inch backlit LCD, and describes use for two simultaneous readings. The page does not specify backlight duration or control behavior.
  3. 3.Leave-In Meat Thermometers – TempProTempPro · Official specifications · Source checked 2026-10-18 03:28 UTC
    Evidence used on this page
    • U.S. collection FAQs, Which TempPro leave-in thermometer should I buy? and Should I get a single probe or dual probe?: TempPro directly names TP16S and TP17 in its choice guidance: one probe tracks one target; two probes can show meat and cooker temperature or two cuts. It describes the TP17 screen as constantly lit and the TP16S as having one-touch backlight. The exact TP17 product page confirms a backlit screen but does not specify illumination duration.

Continue comparing