Skip to content
Pickoryx

UGREEN PB728 vs Anker A1695: Which Fits Your Charging Setup?

Choose by the ports and profiles your devices actually use. PB728 has the higher published USB-C total ceiling; A1695 has the higher published USB-A output and more named USB-A protocols. A paired specialist test reports both throttling under a constant 100W load near the last quarter of charge, so neither's headline wattage should be read as sustained output.

Published by Pickoryx · Published 2026-10-07

Source checked 2026-10-07 11:25 UTC

Products compared

Pickoryx may earn a commission from qualifying purchases through the paid Amazon links on this page, at no added cost to you.

The buying question

Do the PB728's higher published USB-C total and charging-protocol claims fit your devices better than the A1695's documented USB-A output and protocol options?

UGREEN advertises a higher 200W total; Techtest reports Xiaomi's proprietary 90W mode for the PB728. Anker documents 33W USB-A output; Techtest reports more named USB-A protocols for A1695. Actual device speed depends on the device, selected port, cable and negotiated profile.

Quick verdict

Choose UGREEN Nexode Pro PB728 if

  • Your two USB-C devices can benefit from PB728's advertised up-to-200W total, and their combined draw and cable negotiation are within the bank's limits.
  • Your exact Xiaomi device is confirmed to use the proprietary fast-charge mode that Techtest reports for PB728.
View UGREEN Nexode Pro PB728 on AmazonPaid link

Choose Anker Power Bank A1695 (Black) if

  • A device in your kit uses USB-A and can take advantage of the A1695's advertised up-to-33W output or its listed QC 3.0, UFCS, FCP or SCP profiles.
View Anker Power Bank A1695 (Black) on AmazonPaid link
When to skip: Your devices require more power or a charging profile that neither product's exact documentation confirms; check the device's required input profile before choosing either bank.
When the recommendation changes
  • Check the exact devices and cables: if their combined USB-C draw stays within both banks' published limits, the nominal 200W versus 165W difference may not affect your kit.
  • If a Xiaomi device's required proprietary profile is not confirmed for the exact phone and cable, do not use the review's Xiaomi 90W note as a guaranteed speed promise.
  • UGREEN's US page contains conflicting capacity text; capacity is not used to rank these two models here.

The differences that matter

Multi Device Port And Load Fit

UGREEN Nexode Pro PB728

UGREEN advertises up to 200W total, up to 100W per USB-C, with three USB-C outputs and one USB-A. Its official German PB728/SKU 75702 page describes 200W in dual use; the US page identifies SKU 75702 but has a conflicting 20,000mAh value in its structured Specs block, so capacity is not compared.[1, 2]

Anker Power Bank A1695 (Black)

Anker lists up to 165W total, any two USB-C outputs up to 165W, USB-C plus USB-A up to 133W, and up to 130W for three or four devices; it has three USB-C outputs and one USB-A.[3]

What this changes: The higher PB728 ceiling may matter if two USB-C devices together need more than Anker's published 165W dual-port ceiling, but the exact pair of devices, ports and cables must negotiate those levels. In Techtest's reported constant-100W test, A1695 throttled at about 25% remaining and PB728 at about 29%; the source gives no detailed test rig or port mapping for that cutoff, so this does not establish sustained-output superiority.[1, 2, 3, 4, 5]

The better fit depends on your priorities

Device Protocol Compatibility

UGREEN Nexode Pro PB728

Techtest reports PPS 3.6–21V up to 5A and Xiaomi's proprietary 90W mode for PB728. It lists USB-A as 18W QC or up to 22.5W Super Charge. The report names no Xiaomi test phone or cable, so it does not establish 90W for any particular Xiaomi device.[4, 5, 2]

Anker Power Bank A1695 (Black)

Techtest reports PPS 4.5–21V up to 5A for A1695; its paired table lists USB-A as 33W with QC 3.0, UFCS, FCP and SCP. Anker's US page independently lists USB-A up to 33W but does not name its protocol version.[4, 3]

What this changes: For USB-A accessories, the published output and protocol lists favor A1695 when the accessory accepts one of its named modes. For a Xiaomi handset, PB728 is the only model in this review reported to support the proprietary 90W mode, but the exact handset and cable were not tested or identified; verify both before buying. Both banks' reported PPS ranges reach 21V at up to 5A, and the lower PB728 start voltage alone is not treated as a speed advantage.[4, 5, 3, 2]

The better fit depends on your priorities

Best for your routine

A kit that needs a published USB-C combined-output ceiling above 165W and at or below PB728's advertised 200W maximum

Best fit: UGREEN Nexode Pro PB728

Based on listed features, not comparative testing.

UGREEN advertises up to 200W total and up to 100W per USB-C, whereas Anker documents up to 165W for any two USB-C outputs. This is a published-maximum fit only; verify the precise device and port combination.

View UGREEN Nexode Pro PB728 on AmazonPaid link

A USB-A accessory that needs the A1695's listed 33W output or a named QC 3.0, UFCS, FCP or SCP mode

Best fit: Anker Power Bank A1695 (Black)

Based on listed features, not comparative testing.

Anker publishes a 33W USB-A maximum and Techtest lists these USB-A modes for A1695; confirm the accessory's required protocol because charging speed is device-specific.

View Anker Power Bank A1695 (Black) on AmazonPaid link

Value and trade-offs

One or both observed offers have eligibility conditions, so no unrestricted price difference is shown.

Compare the live offers at purchase time. The PB728's higher advertised USB-C total matters only if your devices use that headroom; the A1695's USB-A output matters only if your kit uses a compatible USB-A profile.

No usable price-history window was checked, so there is not enough evidence for a Buy Now or Wait recommendation.

Limitations

  • This comparison uses published specifications and a specialist's reported model tests; Pickoryx did not test either unit.
  • Techtest's PB728 review says UGREEN supplied its review sample and discloses affiliate links. It reports a constant-100W throttle threshold and electronic-load capacity checks, but does not publish full rig details for the comparative load test or identify a Xiaomi phone/cable for its proprietary-mode claim.
  • UGREEN's official US page lists SKU 75702 and describes the 25,000mAh/200W offer, but its structured Specs block says 20,000mAh. Its German official page identifies PB728 and the same SKU 75702 at 25,000mAh. Capacity is therefore not used as a buying distinction.
  • Maximum-output claims do not establish sustained output, actual charging time, or compatibility with every laptop or phone. Confirm the exact device's required port, cable and charging profile.

Questions shoppers ask

Can the PB728 deliver 200W while charging two devices?

UGREEN advertises up to 200W total and its official PB728 page describes up to 200W in dual use. That is a manufacturer maximum, not an independent test of every device pair; the connected devices and cables must negotiate supported profiles.

Will the PB728 charge every Xiaomi phone at 90W?

No such guarantee is established here. Techtest reports the PB728 supports Xiaomi's proprietary 90W mode but does not identify the tested handset or cable. Check the exact phone's charging requirements and compatible cable.

Methodology and sources

Compared the PB728 and A1695 models using current official product pages and a direct model-level specialist comparison. We used reported peak allocations and only the stated constant-100W load condition; we did not infer charging speed for unspecified devices, universal compatibility, or sustained output from peak wattage.

Research assistance was used to locate and organize the cited sources. Pickoryx did not test either power bank.

View 5 sources
  1. 1.UGREEN 25000mAh 200W Laptop Power Bank – UGREEN USUGREEN US · Official specifications · Source checked 2026-10-07 10:29 UTC
    Evidence used on this page
    • Key Benefits and Specs; SKU 75702. US page states 25,000mAh in heading/copy but 20,000mAh in structured Specs.: Official US listing describes up to 200W total, up to 100W per USB-C, three USB-C and one USB-A, two integrated USB-C cables, and several named charging protocols.
  2. 2.UGREEN Nexode Pro 25.000 mAh Laptop-Powerbank | UGREEN DEUGREEN Germany · Official specifications · Source checked 2026-10-07 10:29 UTC
    Evidence used on this page
    • Model/SKU block identifies PB728 / 75702; benefit description states 200W dual use and four-port layout.: Official regional page identifies PB728 and SKU 75702 with 25,000mAh capacity and 200W configuration. It supports model crosswalk; regional availability/package remains distinct from the US listing.
  3. 3.Anker Laptop Power Bank (25K, 165W, Built-In and Retractable Cables) - Anker USAnker US · Official specifications · Source checked 2026-10-07 10:29 UTC
    Evidence used on this page
    • Model Number A1695; multi-port output sections; Specifications.: Exact US A1695 page identifies model number, 25,000mAh capacity, three USB-C outputs plus USB-A, and published combined-output allocations including 165W for any two USB-C, 133W for USB-C plus USB-A, and 130W max for 3–4 devices; USB-A up to 33W.
  4. 4.Anker 165 W Powerbank vs. UGREEN Nexode Pro: Welche 25.000-mAh-Powerbank ist besser?Techtest · Independent testing · Source checked 2026-10-07 11:25 UTC
    Evidence used on this page
    • Published 10 May 2026; model table and sections Anschlüsse, Konstante Leistung, PPS-Support, Xiaomi 90 W.: Direct paired comparison identifies Anker A1695 and UGREEN PB728. Reports both PPS ranges (A1695 4.5–21V/5A; PB728 3.6–21V/5A), USB-A output/protocol differences, Xiaomi proprietary-mode support only for PB728, and constant 100W load throttling near 25% versus 29% remaining.
  5. 5.UGREEN Nexode Pro PB728 200 W im Test, eine 25.000 mAh Powerbank mit zwei integrierten KabelnTechtest · Independent testing · Source checked 2026-10-07 11:25 UTC
    Evidence used on this page
    • Published 6 May 2026; sections Anschlüsse, PPS-Support, Xiaomi 90 W, Konstant 100 W?; lines 141–158 report load and electronic-load procedure.: Exact PB728 review says UGREEN supplied the sample; reports USB-C and USB-A profiles, PPS range, Xiaomi mode, throttling at about 29% battery under a constant 100W load, and capacity measurements made with an electronic load.

Continue comparing